H-LIFT INDUSTRIES CO LTD
          About us       |       Products      |        Service       |       Contact us      |        Sitemap www.h-lift.com
   Products>>>>G-80 Alloy Fittings |G-80 Chain SlingG-80 Alloy Chain | G-100 Alloy Fittings  |

  

  Product Categories

 

w    

 

 

 

 

 

GRADE 80 ALLOY FITTINGS/SLING COMPONENTS
grade 80 sling components, grade 80 alloy fitting, connecting link, web sling connector, eye self locking hook, clevis self locking hook, swivel self locking hook, swivel hook, eye sling hook, eye grab hook,clevis sling hook,clevis grab hook,masterlink,master link assembly,lifting swivel,eye bolt,eye nut

G-80 CONNECTING LINK

 

 

G-80 WEB SLING CONNECTOR

 

G-80 OMEGA LINK

 

grade 80 sling components, grade 80 alloy fitting, connecting link, web sling connector, eye self locking hook, clevis self locking hook, swivel self locking

 hook, swivel hook, eye sling hook, eye grab hook,clevis sling hook,clevis grab hook,masterlink,master link assembly,lifting swivel,eye bolt,eye nut

G-80 EYE SELF LOCKING HOOK

 

 

G-80 EYE SELF LOCKING HOOK WITH GRIP

 

grade 80 sling components, grade 80 alloy fitting, connecting link, web sling connector, eye self locking hook, clevis self locking hook, swivel self locking hook, swivel hook, eye sling hook, eye grab hook,clevis sling hook,clevis grab hook,masterlink,master link assembly,lifting swivel,eye bolt,eye nutG-80 CLEVIS SELF LOCKING HOOK

 

 

G-80 CLEVIS SELF LOCKING HOOK WITH GRIP

grade 80 sling components, grade 80 alloy fitting, connecting link, web sling connector, eye self locking hook, clevis self locking hook, swivel self locking hook, swivel hook, eye sling hook, eye grab hook,clevis sling hook,clevis grab hook,masterlink,master link assembly,lifting swivel,eye bolt,eye nut

G-80 SWIVEL SELF LOCKING HOOK

 

 

 

 

 

G-80 EYE SLING HOOK WITH LATCH

G-80 CRADLE EYE GRAB HOOK

 

G-80 EYE HOOK WITH LATCH

 

 

G-80 EYE FOUNDARY HOOK

 

grade 80 sling components, grade 80 alloy fitting, connecting link, web sling connector, eye self locking hook, clevis self locking hook, swivel self locking hook, swivel hook, eye sling hook, eye grab hook,clevis sling hook,clevis grab hook,masterlink,master link assembly,lifting swivel,eye bolt,eye nut

G-80 CLEVIS SLING HOOK

 

 

G-80 CRADLE CLEVIS GRAB HOOK

 

 

 

G-80 CLEVIS GRAB HOOK

 

 

 

 

 

grade 80 sling components, grade 80 alloy fitting, connecting link, web sling connector, eye self locking hook, clevis self locking hook, swivel self locking hook, swivel hook, eye sling hook, eye grab hook,clevis sling hook,clevis grab hook,masterlink,master link assembly,lifting swivel,eye bolt,eye nut

 

 

 

 

G-80 D RING

 

 

G-80 LIFTING SWIVEL

 

 

G-80 EYE BOLT, EYE NUT

 

 

G-80 LIFTING CLUTCH

grade 80 sling components, grade 80 alloy fitting, connecting link, web sling connector, eye self locking hook, clevis self locking hook, swivel self locking hook, swivel hook, eye sling hook, eye grab hook,clevis sling hook,clevis grab hook,masterlink,master link assembly,lifting swivel,eye bolt,eye nut

GRADE 80 MASTER LINK

 

 

GRADE 80 MASTER LINK ASSEMBLY

 

 

GRADE 80 MASTER LINK

 

 

 

 

 

 

 

 

MASTER LINK

 

 

G-8 MASTER LINK ASSEMBLY

 

GRADE 80 SHACKLE

grade 80 sling components, grade 80 alloy fitting, connecting link, web sling connector, eye self locking hook, clevis self locking hook, swivel self locking hook, swivel hook, eye sling hook, eye grab hook,clevis sling hook,clevis grab hook,masterlink,master link assembly,lifting swivel,eye bolt,eye nut

Inspection Before Use


The pre-use check for hooks should cover the following:

  1. The WLL should be clearly marked.

  2. The safety catch should be in place and functioning correctly.

  3. The hook should be checked for any distortion, cracking and excessive wear or corrosion.
    NOTE: The wear on the bearing surface of the hook should not exceed 8% of the nominal dimension.

  4. Check that the opening of the hook is within the manufacturers parameters. If the hook is opened excessively it is a sign that it has been point loaded or overloaded.

  5. Moving parts such as release cams should be checked for free movement.

  6. If the hook is a ball bearing swivel hook check that the hook is swivelling freely and that the bearing is not making any unusual noises. Unusual noises are often a sign of bearing fatigue or bearing failure.

  7. If the hook has a threaded machined shank ensure that the thread is in good order and that the nut is turning freely on the thread

 

Care in Use

 

  1. For hooks used in frequent load cycles or pulsating loads, the hook and threads should periodically be inspected by Magnetic Particle or Dye Penetrant. (Note: Some disassembly may be required.)

  2. Never use a hook if its throat opening has been increased, or its tip has been bent more than 10 degrees out of plane from the hook body, or is in any other way distorted or bent. Note: A safety catch will not work properly on a hook with a bent or worn tip.

  3. Never use a hook that is worn beyond a recommended maximum of 8%.

  4. Remove from service any hook with a crack, nick, or gouge. Hooks with cracks, nicks, or gouges shall be repaired by carefully grinding lengthwise, following the contour of the hook, provided that the reduced dimension is within the 8% wear limit.

  5. Never repair, alter, rework, or reshape a hook by welding, heating, burning or bending.

  6. Never side load, back load, or tip load a hook.

  7. Eye hooks, shank hooks and swivel hooks are designed to be used with wire rope or chain. Efficiency of an assembly may be reduced when used with synthetic material.

  8. Always make sure the hook supports the load. The catch must never support the load.

  9. When placing two sling legs in a hook, make sure the angle from the vertical to the outermost leg is not greater than 45 degrees, and the included angle between the legs does not exceed 90 degrees.

  10. The WLL of a hook applies only when the load is correctly positioned on the load line of the hook. If the hook is eccentrically loaded, or the load is applied other than on the load line, the WLL is greatly reduced.

  11. Always use a swivel hook, or insert a swivel link between the load hook and the lifting rope, when the load has a tendency to rotate when lifted.

  12. Always check to ensure that the hook safety catch has closed correctly before allowing the load to be lifted

 

       Products>>G-80 Alloy Chain  |  G-80 Chain Sling  | G-80 Alloy Fittings  |   G-100 Alloy Fittings  |

       About us  |  Products  |  Service  |   Contact us  |  Sitemap www.h-lift.com
 Copyright @ 2017 H-Lift Industries Co.,Ltd. All rights reserved
8/F., No. 560 Jincheng Road, Xiaoshan, Hangzhou, 311202, China
Tel: +86-571-8263-6008, 8263-6018, 8263-6058, 8263-6068
Fax: +86-571-8263-6028 E-mail: info@h-lift.com